There should be no need to shut down the main house supply. You really don't want to do that since it can lead to other issues. No matter what plumbing...
1 Answers 1 viewsMake sure the torches are not getting a constant signal, as that will leave it off. Try making a slow redstone clock that directly powers the block the torch is...
1 Answers 1 viewsThe car stalls if the RPM level is too far below idle. An easier way for beginners to get the car moving in first gear is to slowly release the...
1 Answers 1 viewsThat could mean your amp cannot handle the sub. Another important factor to consider is Ohms. If you have a 2 ohm sub and a 4 ohm amp it won't...
1 Answers 1 viewsIn order to do that you would need to take off the breaker panel cover, which is not recommended unless you are trained. If you have power to other parts...
1 Answers 1 viewsTry to unplug your TV, wait 10 seconds, and then plug it back in and turn it on. If that does not work, try to factory reset your TV. Check...
1 Answers 1 viewsIf you're going to be using them within the same day, it's fine to leave them at operating pressure, but it is best to shut everything off (tank valves off...
1 Answers 1 viewsExcuse yourself as soon as possible and take your phone with you, ideally hiding it in a purse or pocket. It won't draw too much attention, and this method will...
1 Answers 1 viewsYou can and it's not a bad practice at all. In fact, that's your only option if there are no external settings on the water heater itself.
1 Answers 1 viewsThe short answer is, probably not. The wires coming out of that breaker may not be thick enough to handle 20 amps and you risk fire. If you can guarantee...
1 Answers 1 views